SBC6300X Atmel AT91SAM9263 development kit on ARM926EJ-S core

Based on Atmel AT91SAM9263 on ARM926EJ-S core
- Flexible solution with motherboard and control panel
- 8 UART ports, 2 Ethernet ports, USB, CAN, LCD interface, touch screen interface, SD, Keyboard interface, Audio codec and much more
- Supports Linux2.6 and WinCE 6.0 OS and probably their newer versions

Mini6300 CPU board
- Atmel AT91SAM9263 (ARM926EJ-S, with MMU, 200 MHz)
- 64Mbyte SDRAM
- 128Mbyte Nand Flash
- 2Kbit EEPROM
- One LED beacon
- 0.8mm, 100pin Free Height (FH) connectors for connection to motherboard

Motherboard
- 40pin connector (2*20pin, 2.54mm) for LCD interface (STN or TFT, resolution up to 2048 x 2048, can be used with 3.5"/4.3"/5.6"/7″ LCDs)
- Touch panel connector (resistive 4-wire)
- Two 10/100M Ethernet connections (one from the controller with MCU, the other extended with DM9000)
- Eight serial ports (Debug: 3-wire RS232/TTL, COM0: 5-wire RS232/TTL, COM1:
5-wire RS232/TTL, COM2: 3-wire RS232/TTL/half-duplex RS485, EXT_COM1/2/3/4:
5-wire RS232)
- Two USB2.0 full-speed host and one USB2.0 full-speed device
- One CAN2.0 interface
- One TWI interface (I2C compatible)
- Keypad connector 6 x 6 (can be used as an independent 12 IO)
- Audio Input/Output connectors
- 8-channel 12-bit ADC
- RTC clock (battery-backed)
- One standard 20-pin JTAG connector
- One SD card slot (SDIO mode, supports hot plugging)
- Buzzer
- Buttons (2 for GPIO, 1 for Wakeup and 1 for Reset)
- 20pin connector for panel (Reset & Wakeup & IO & Switch)
- 41 GPIOs (can be multiplexed with other interfaces, including ISI, 4 PWM, 1SDIO and 1 SPI1)